Galvanized iron wire, soft annealed, electro galvanized and hot
dipped galvanised, pvc or epoxy coated into colors. Made of high carbon, medium and low carbon steel.

Home >> Products >> Oval Fencing Wire, Plant Support Wire

Oval Wire

Oval wire is popularly used as fencing wire for cattle and other big animals by farmers. It is also used to support the growing plants or tomatoes.

Benefits of Using Oval Wire:
High tensile fencing for animals;
High corrosion resistance with hot dipped galvanizing protection;
Easy handling with oval section shape.

Applications for galvanized oval steel wire:
Agriculture fencing;
Vineyard support;
Trellis support;
Horticulture structures.

Common Sizes for galvanized oval steel wire:
Size :2.7/2.2mm,3.0/2.4mm
Zinc coating rate:40g/m2-300g/m2
Coil weight: 25-800kg

Galvanized steel oval wire is made of high carbon steel. It is widely used in South America countries.

Technical Information:
Tensile strength: 1000-1200N/mm2
Breaking Load: 600KGF 725KGF 800KGF 1200KGF
Packing: 1000m/roll, 1250m/roll or 50kg/roll

Plastic film inside and woven cloth outside or only wrapped with plastic and PVC strip


Packed Oval Section Shaped Galvanized Wire	High Carbon Steel Galvanized Oval Wire

Specifications Sheet:

wire gauge size	SWG(mm)	BWG(mm)	J. de p
12	2.64	2.77	1.8
13	2.34	2.41	2.0
14	2.03	2.11	2.2
15	1.83	1.83	2.4
16	1.63	1.65	2.7
17	1.42	1.47	3.0
18	1.22	1.25	3.4
19	1.02	1.07	3.9
20	0.91	0.89	4.4
21	0.81	0.813	4.9
22	0.710	0.711	5.4
23	0.6096	0.6347	5.9

Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.

Nominal Diameter	Minimum Coating Mass (g/m2)
Nominal Diameter	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.45mm * 5.25mm	50 50 50 50 35	90 90 90 90 50	230 230 230 230 230

Tensile Strength (Mpa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

Nominal Wire Diameter	Bread Loading (kgf)
Nominal Wire Diameter	Standard Galv.	Heavy Galv.	Extra-highGalv.
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm	600 600 600 600 600	800 800 800 800 800	870 870 870 870 870

Nominal Wire Diameter	Packing (meter)
Nominal Wire Diameter	1	2	3
2.4 mm * 3.00mm 1.8 mm * 2.20mm 2.0 mm * 2.4mm 2.2 mm * 2.70mm 4.55mm * 5.25mm	500 500 500 500 500	1000 1000 1000 1000 1000	1200 1200 1200 1200 1200

Steel Chemistry

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

Tensile Grade	% Carbon	% Phosphorus	% Manganese	% Silicon	% Sulphur
Normal	0.45 ~ 0.50	0.032	0.5 ~ 1.00	0.10 ~ 0.34	0.041
High	0.59 ~ 0.63	0.035	0.5 ~ 1.10	0.10 ~ 0.35	0.045